AddPac VoiceFinder AP200 User Manual page 99

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
AddPac Technology Co.,Ltd.
default is one hour.
4) dns <dns-address>: Sets the addresses of the DNS server so that
DHCP clients can use them.
5) domain-name <domain-name>: Designates the domain name to
be used by DHCP clients. The domain name and the IP address
are given together to DHCP clients.
6) Ethernet-encapsulation {Ethernet/ieee}: Sets that the DHCP clients
should inform the Ethernet encapsulation method that the Gateway
is going to use. The VoiceFinderAP200 Gateway supports Ethernet
Version 2 and IEEE802.2 address. The default is Ethernet Version 2.
7) interface-mtu <mtu-value>: Sets MTU value for the interface.
8) name-server <name-server-address>: Sets the name server address.
9) ntp-server < ntp-server-address >: Sets the NTP server address.
10) max-lease-time <time(second)>: Sets time value to check how long
each IP address allocated by the DHCP server is valid. After time
passes, all addresses are recovered to be free regardless of the
connection status.
11) smtp-server < smtp-server-address >: Sets the SMTP server address.
12) pop3-server < pop3-server-address >: Sets POP3 mail server address.
13) Gateway-option < default-Gateway-address >: After the DHCP
client is booted, the DHCP client sends packets to its default
Gateway. Therefore, the address and the default Gateway of the
DHCP client shall be set. With this command, the user can set the
address and the default Gateway.
14) static-route <destination-address> <Gateway-address>: Routes an
initial DHCP packet to a certain address.
15) time-server < time-server-address >: Sets the time server address.
16) www-server < www-server-address >: Sets the web server address.
99
- -