Description (Dial-Peer) - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
G7231r53
5.7.4.2.2. Default Value
G.723.1 6.3Kbps
5.7.4.2.3. Command Mode
Dial-Peer Configuration Mode
5.7.4.2.4. Usage Guideline
Use the codec command to define a specific voice coder rate of speech for a
dial peer.
For toll quality, use G.711.alaw or G.711.ulaw. These values provide high-quality
voice transmission but use a significant amount of bandwidth. For almost toll
quality (and a significant savings in bandwidth), use the G.729 value.
If codec values for the VoIP peers of a connection do not match, the call will
fail.
5.7.4.2.5. Examples
The following example configures a voice coder rate that provides toll quality
and uses a relatively high amount of bandwidth:
dial-peer voice 10 VoIP
codec g711alaw
5.7.4.3.

description (dial-peer)

To include a description of what this VoIP dial peer is connected to, use the
description dial-peer configuration command. Use the no form of this
command to disable this feature.
AddPac Technology Co.,Ltd.
G.723.1 5.3Kbps Codec
232
- -