Configuration Mode - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.2.3.3. Commands of the Interface Configuration Mode 2 (IP

Configuration Mode)

The user can use IP related commands in the selected interface.
The prompt is indicated as router(config-ether0.0)#.
Command
access-group
accounting
address
dhcp-group
exit
end
nat-group
no
proxy-arp
AddPac Technology Co.,Ltd.
applies the access-list that has been set in the global
configuration environment to the interface.
Apply IP Account List to the selected interface.
Sets or changes the IP address of the Interface.
applies the DHCP-list that has been set in the global
configuration environment to the interface.
Returns to the previous (configuration) menu.
Returns to the initial (Exec) mode.
applies the NAT-list that has been set in the global
configuration environment to the interface.
Cancels the environment parameters that have been set in
the configuration mode or returns them to the default
values.
Enables IP proxy ARP for the corresponding interface.
Description
58
- -