Voice Port Configuration Command; Comfort-Noise - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

5.7.3. Voice Port Configuration Command

5.7.3.1.

comfort-noise

To generate background noise to fill silent gaps during calls if voice activity
detection (VAD) is activated, use the comfort-noise command in voice-port
configuration mode. To provide silence when the remote party is not speaking
and VAD is enabled at the remote end of the connection, use the no form of
this command.
comfort-noise
no comfort-noise
5.7.3.1.1. Syntax
This command has no arguments or keywords.
5.7.3.1.2. Default Value
Enabled
5.7.3.1.3. Command Mode
Voice-port configuration Mode
5.7.3.1.4. Usage Guideline
Use the comfort-noise command to generate background noise to fill silent
gaps during calls if VAD is activated. If the comfort-noise command is not
enabled, and VAD is enabled at the remote end of the connection, the user
will hear dead silence when the remote party is not speaking.
The configuration of the comfort-noise command only affects the silence
generated at the local interface; it does not affect the use of VAD on either
end of the connection or the silence generated at the remote end of the
connection.
AddPac Technology Co.,Ltd.
216
- -