AddPac VoiceFinder AP200 User Manual page 238

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.4.6.2. Default Value
In the default, if the called party number matches with the destination pattern
of the outbound POTS peer, only digits that are not matched will be forwarded.
5.7.4.6.3. Command Mode
Dial-Peer Configuration Mode (POTS peer)
5.7.4.6.4. Usage Guideline
This command is a dial-peer setup mode command and applied only to the
POTS peer.
This command is used to define number of digits when relaying last digits of the
called party number of an inbound call as the called party number of the
outbound call. The default is no forward-digit, and in the default status, number
forwarding is made.
5.7.4.6.5. Examples
If POTS peer 10 is decided for the outbound, call and if the called party
number of the inbound call is 100123456789, number 123456789 will be
forwarded as set in the default. This is because "forward-digit" has not been
set.
dial-peer voice 10 pots
destinarion-pattern 100...
If "forward-digit from" is added to the above setting, only "456789" (from the 7
digit to the last digit) will be forwarded.
forward-digit from 7
In the following example, all digits (100123456789) will be forwarded.
AddPac Technology Co.,Ltd.
than the maximum digits that can be forwarded,
only the digits that can be forwarded at maximum
are forwarded.
th
238
- -