Fault Management And Debugging; Logging Command - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.13.

Fault Management and Debugging

This chapter describes how to handle and process faults while operating the
VoiceFinder AP200 Gateway.
commands, "Debug" commands and "logging" commands for fault handling.
4.13.1.

Logging Command

Logging commands log equipment operation status to manage equipments,
and decide the level of log information. Logging commands also can send
log information to a certain host outside. Logging configuration can be made
in the global configuration mode.
Logging configuration related commands are as follows:
logging on
Enables logging for all available destinations.
logging condition {option}
1. Sets commands to logging targets.
2. Option
logging destination {option}
1. Sets conditions of the destination host to send logging information.
2. Option
AddPac Technology Co.,Ltd.
1) command: Logs commands used.
2) event interface {Ethernet/serial} [interface-number]: Logs changes
of a certain interface.
3) event protocol {all/critical/icmp}: Logs events of certain protocol.
4) alarm {all/critical/information/major/minor/warning}: Sets logging
targets for alarms of certain level.
5) debugging: Logs debugging information.
The AP200 Gateway provides "show"
120
- -