AddPac VoiceFinder AP200 User Manual page 63

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
Forcefully registers information about the corresponding pair of the IP
address and the hardware address in the ARP table.
1. Defines the size of the ARP table for the corresponding interface.
2. The default is 50. The size of the ARP table can be changed between
1. An optional command to make the current interface up/down.
2. The Ethernet interface cannot shut down the main interface. To make
An optional command to remove the logical interface.
represents the name of the logical interface.
Shows the interface status of "if-name."
AddPac Technology Co.,Ltd.
arp table-size <table-size>
10 and 256. Adjust the size of the ARP table according to the number
of PCs or terminals connected to the network.
shutdown / no shutdown
a certain Ethernet interface up/down, go to the corresponding
sub-interface.
no interface <if-name>
show interface <if-name>
"If-name"
63
- -