AddPac VoiceFinder AP200 User Manual page 118

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
exit
1. Exits from the current mode, and enters into the next lower mode.
2. If the user uses "exit" command in the global configuration mode, the
help
Describes the interactive help system.
history
1. Shows history of used commands.
2. The AP200 Gateway keeps maximum 25 histories in each mode.
3. To use the command again, enter "! History#."
hostname { host-name }
Sets a name in the network of the Gateway.
interface { ethnet/null/loopback} < main-interface.sub-interface >
Enters into a configuration mode of a certain interface.
logging { option }
1. Sets logging of the equipment.
2. For more information, see "4.13 Fault Handling and Debugging."
nat-list { option }
1. Sets Network Address Translation (NAT.)
2. For more information, see NAT Configuration in the previous chapter.
no {option}
An important command to negates commands that the user used or have
been set.
queue-list { option }
1. Sets the traffic queuing.
2. For more information, see Traffic Queuing Configuration in the previous
AddPac Technology Co.,Ltd.
user will be able to go back to the Exec mode.
118
- -