AddPac VoiceFinder AP200 User Manual page 56

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
debug-port
dhcp-list
dial-peer
exit
gateway
hostname
Interface
ip
kill
logging
nat-list
no
Num-exp
queue-list
route
router
service
snmp
traceroute
translation-rule
ttl
user
utilization
voice
VoIP-port
VoIP-interface
AddPac Technology Co.,Ltd.
Display debug message into remote telnet terminal.
Enables the Gateway to function as a DHCP server or send
a DHCP packet broadcasting to other Gateways.
Sets dial-peer with "VoIP" command.
Goes to the previous mode.
Makes voice gateway related configuration with "VoIP"
command.
Changes the Gateway name of the network.
Enters into the interface configuration mode or creates a
logical interface.
Enables IP routing.
Disconnects a certain Telnet session in the Telnet process.
Changes or sets the message logging function.
Creates Network Address Translation (NAT.)
Cancels commands entered in the command line or
returns commands into default values.
Sets a phone number extension in the VoIP.
Creates a queue-list to set the custom queue.
Adds or deletes static routes.
Enables a routing processor to use routing protocol.
Sets network-based service configuration – SNMP, Telnet,
FTP and TFTP.
Sets "SNMP" command related items.
Execute traceroute
Set translation rules in VoIP Service.
Changes Time-To-Live (TTL) value.
Registers or changes Gateway users.
An optional command to set time intervals to check
availabilities of the CPU, the Ethernet and the serial.
Sets VoIP Service or Avaible Codecs.
Sets the VoIP port.
Sets the VoIP Interface.
56
- -