Backup And Restore Of Configuration File - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.14.4.

Backup and Restore of Configuration File

The AP200 Gateway saves the configuration file in the flash memory of the
Gateway. However, sometimes it is necessary to back up the configuration
file or restore the backed up configuration file. This chapter describes how to
back up or restore the configuration file and related commands. Backup and
restoring procedures of the configuration file are same as upgrade and
backup procedures of software image. However, the configuration file name is
Gateway.cfg. The configuration file is backed up or restored through FTP/TFTP.
When restoring is completed, "Config Database is updated" message is
displayed in the screen. When backing up the configuration file, use "get"
command, and when restoring the configuration file, use "put" command.
The following is an example of backup and restore of configuration information
through TFTP.
[Example] Software Backup through FTP
155 sun10:#> ftp 211.170.87.221
Connected to 211.170.87.221.
220 Gateway FTP server (Version 1.12) ready.
Name (211.170.87.221:noname): root
331 Password required for root.
Password:
230 User root logged in ok.
ftp> bi
200 Type set to I.
ftp> get Gateway.cfg
200 PORT command successful.
150 BINARY data connection for Gateway.cfg (211.170.87.99,44100).
226 BINARY Transfer complete.
local: Gateway.cfg remote: Gateway.cfg
2016 bytes received in 0.0 seconds (375.13 Kbytes/s)
ftp> quit
AddPac Technology Co.,Ltd.
135
- -