Pstn Backup Related Command Setting; Busyout Monitor - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
inbound-pots-peer 0
no inbound-pots-peer
This command can be used to minimize the configuration complexity when
translation rule is applied in 1:1 port mapping at PSTN backup configuration
STEP
1 Router# configure
Router(config)# dial-peer voice tag
2
pots
3 Router(config-dialpeer-pots-<tag>)#
inbound-pots-peer <tag>
5.3.12.

PSTN Backup Related Command Setting

When network interfaces of VoIP gateway are normal and communication
between VoIP gateway and gatekeeper is normal, all call conversion is occurred
via VoIP network.
However, when network interface of VoIP gateway and communication with
gatekeeper is abnormal, user does not use the VoIP service via Internet. In case,
user can use PSTN service via PSTN back-up features. AddPac VoIP gateway
supports the busyout monitor , busy action services for PSTN backup features.
5.3.12.1.

Busyout Monitor

The VoIP gateway performs call transfer to PSTN when network interface of VoIP
gateway and communication with gatekeeper is abnormal.
This Busyout monitor command can assign the PSTN backup condition and pre
-determines the operation mode of VoIP gateway at PSTN backup.
AddPac Technology Co.,Ltd.
Commands Explanation
Enter into configuration setting mode.
dila-peer configuration mode
tag is 0~65535 value as a unique
identifier of dial peer in this system.
Inbound-pots-peer is applied.
tag is 0~65535 value as a unique
identifier of dial peer in this system.
177
- -