Auto-Upgrade - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
4.15.

Auto-Upgrade

When the software (firmware) of AP200 VoIP gateway is upgraded or changed, auto-upgrade
feature reduces the time-consuming point-to-point S/W upgrading JOB via human being at
remote side or local site. The point-to-point S/W upgrading at remote side is impossible
practically if the deployed VoIP equipment number is large. This means the maintenance cost
will be reduced if automatic S/W feature without human being intervene is available.
Generally, when the VoIP gateways are deployed at customer sites via VoIP service provider,
VoIP service provider needs a lot of cost for VoIP equipment H/W and S/W maintenance.
Among these maintenance cost, S/W upgrading cost is mostly charged.
STEP
1 Router# configure
2 Router(config)# auto-upgrade
{action|authentication|auto-reboot|
interval|proxy|url|verbose}
AddPac Technology Co.,Ltd.
Commands Explanation
Enter to the configuration mode
action : Auto-Upgrade timing
(display after URL input)
authentication : Web server
(auto upgrade server)
/Password
auto-Reboot : rebooting decision after
image upgrade
interval : Retrial time at Failure, Success
proxy : proxy server IP Address setting
url : Web server (auto upgrade server) url
setting
verbose : display the status message at
upgrade
Login Name
137
- -