AddPac VoiceFinder AP200 User Manual page 54

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
no
ping
reboot
rlogin
save
show
telnet
test
traceroute
who
write
undebug
user
AddPac Technology Co.,Ltd.
Cancels commands entered in the command line or returns
commands into default values.
Sends an echo message to another network device and tests
if the echo message reaches the destination.
Reboots the system.
Establishes rlogin connection that is similar to the Telnet with by
original login.
VoIP Command. Make VoIP Configuration Script File uses
Gateway VoIP Running Configuration.
Shows configuration status and operating status of the
Gateway. However, in the user mode, "show" command
shows only limited information.
Logs in a neighboring network device through a virtual
terminal.
Tests sub-systems of the Gateway – the memory, interfaces
and so on.
Traces the path that the packet passes through to reach a
certain destination.
Checks users who are currently online in the Gateway, login
method and login time.
Saves the Gateway configuration file.
Stops execution of "debug" command.
Adds a Gateway user or shows user information of the
Gateway. With this command, the current user cannot check
information of the user who has higher authority than
him/herself.
54
- -