Commands Of The Manager Mode - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1

4.2.2. Commands of the Manager Mode

The device manager who logged in the Gateway can use commands of the
manager mode. To use commands of the manager mode, the user shall log
in the Gateway with the root account or manager's ID. Only the manager
can return to the configuration mode of the Gateway.
In the manager mode, commands usually show more information than in the
user mode according to the options. For example, "show" command shows
more information in the manager mode than in the user mode.
In the manager mode, the manager cannot use commands that are used in
the user mode.
The prompt is indicated as "1router#" in the manager mode.
Commands
clear
clock
configure
copy
debug
Exit
help
history
load
AddPac Technology Co.,Ltd.
Displays commands currently available and description of
?
these commands.
Clears statistical data saved in the Gateway.
Indicates system time.
Enters into the system configuration mode.
Saves configuration data that is currently used in the
non-volatile memory of the system.
Displays packets and other information of the system for
system debugging. Be careful in using the command since it
can increase system load. (See "un-debug" command.)
Logs out the operator from the Gateway.
Explains command-using method in an interactive way.
Shows history of the used command lines.
VoIP related command. Loads the VoIP configuration script
file to the VoIP Configuration of the Gateway.
Description
53
- -