Output Gain - AddPac VoiceFinder AP200 User Manual

VoiceFinder AP200 VoIP Residential Gateway (RGW) User's Guide Version 1.1
5.7.3.7.5. Example
Following example shows the –10 decibel gain addition to current level in the
receive port 4 of gateway.
port 4
low-dtmf-gain -10
5.7.3.8.

output gain

To configure a specific output gain value, use the output gain voice-port
configuration command. Use the no form of this command to disable the
selected output gain value.
output gain value
no output gain value
5.7.3.8.1. Syntax
Keyword / Argument
value
5.7.3.8.2. Default Value
0
5.7.3.8.3. Command Mode
Voice-port configuration Mode
5.7.3.8.4. Usage Guideline
A system-wide loss plan must be implemented using both input gain and output
gain commands. Other equipment (including PBXs) in the system must be
taken into account when creating a loss plan.
AddPac Technology Co.,Ltd.
Description
The amount of gain in decibels at the transmit side
of the interface.
Acceptable value is any integer from -31 to 31.
The default value for FXO, FXS, and E&M ports is 0..
224
- -