Show Stpd Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
STP Commands

show stpd ports

show stpd <stpd_name> ports {[detail | <port_list> {detail}]}
Description
Displays the STP state of a port.
Syntax Description
stpd_name
port_list
detail
Default
N/A.
Usage Guidelines
This command displays the following:
STPD port configuration
●
STPD port encapsulation mode
●
STPD path cost
●
STPD priority
●
STPD state (root bridge, and so on)
●
Port role (root designated, alternate and so on)
●
STPD port state (forwarding, blocking, and so on)
●
Configured port link type
●
Operational port link type
●
Edge port settings (inconsistent behavior, edge safeguard setting)
●
MSTP port role (internal or boundary)
●
To display more detailed information for one or more ports in the specified STPD, including
participating VLANs, specify the
If you have MSTP configured and specify the
information:
MSTP internal path cost
●
MSTP timers
●
1224
Specifies an STPD name.
Specifies one or more ports or slots and ports.
Specifies more detailed information about one or more ports of the STPD.
option.
detail
option, this command displays additional
detail
ExtremeWare XOS 11.5 Command Reference Guide