Part Code 8107 - HP StorageWorks P9000 - Disk Arrays Manual

Table 65 Error codes (part code 8105) (continued)
Part Error
Code Number
8105 6012
8105 6023
8105 6513
8105 6524
8105 7060
8105 71 1 1
8105 65639
8105 66003
8105 66005
8105 66006
8105 66008
8105 66010
8105 75009

Part code 8107

Table 66 Error codes (part code 8107)
Part Error
Code Number
8107 5641
8107 5642
8107 5643
268 Message (part code group 8nnn)
Error Message
An error occurred during SVP
processing.
The SVP is busy. Please wait for a while,
and then retry the operation.
A command was double started.
The port information is inconsistent with
PCB mode information.
An error occurred during SVP
processing.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
The DKC serial number does not match.
Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
The spreadsheet declaration statement
or the definition statement is not entered
in the spreadsheet file.
The number of data items entered in the
spreadsheet has exceeded the limit.
The number of digits is invalid.
The format is invalid.
The selected WWN has been registered
in a host group.
Error Message
The number of lines exceeds the
maximum number of lines of a
spreadsheet.
The number of characters exceeds the
maximum number of characters of a
spreadsheet.
A time-out error occurred. Please wait
for the SVP to reboot, and then retry the
operation.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Retry the operation a little later.
Correct the port information or the PCB
mode information.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the spreadsheet, and match the
serial number under the [SerialNumber]
function tag and the DKC serial number.
Check the spreadsheet, and make only
one description of the [SerialNumber]
function tag.
Check the spreadsheet, and enter a
serial number under the [SerialNumber]
function tag.
Check the spreadsheet, and enter only
one serial number under the
[SerialNumber] function tag.
Check the spreadsheet, and set the
number of digits of the serial number
under the [SerialNumber] function tag
to five or less.
Check the spreadsheet, and change the
serial number under the [SerialNumber]
function tag to a decimal numeral.
Check the settings, then retry the
operation.
Recommended Action
Check the setting.
Check the setting.
If the same error occurs despite retrying,
please contact HP Technical Support.
Severity
Level
E
W
E
W
E
E
E
E
E
E
E
E
W
Severity
Level
W
W
W