Using Aaa Tunnel Groups To Configure The Transmit Connect Speed Calculation Method - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide

Using AAA Tunnel Groups to Configure the Transmit Connect Speed Calculation Method

402
host1(config-domain-map-tunnel)#tx-connect-speed-method dynamic-layer2
(Optional) Use the show aaa domain-map command to verify configuration of the
3.
transmit connect speed calculation method.
host1(config-domain-map-tunnel)#run show aaa domain-map
Domain: sunnyvale.com; router-name: lac; ipv6-router-name: default
Tunnel Tunnel
Tag Peer
------ ------
5 <null>
Tunnel
Tunnel Server
Tag Name
------ ------
5 <null>
Tunnel
Tunnel Failover
Tag Resync
------ --------
5 <null>
To configure the transmit connect speed calculation method for a tunneled L2TP session
associated with an AAA tunnel group:
Access Tunnel Group Tunnel Configuration mode.
1.
host1(config)#aaa tunnel-group boston
host1(config-tunnel-group)#tunnel 3
host1(config-tunnel-group-tunnel)#
For more information about how to map a domain to an L2TP tunnel from Tunnel
Group Tunnel Configuration mode, see "Mapping a User Domain Name to an L2TP
Tunnel Overview" on page 358.
From Tunnel Group Tunnel Configuration mode, configure the calculation method for
2.
the transmit connect speed of the subscriber's access interface.
host1(config-tunnel-group-tunnel)#tx-connect-speed-method qos
(Optional) Use the show aaa tunnel-group command to verify configuration of the
3.
transmit connect speed calculation method.
host1(config-tunnel-group-tunnel)#run show aaa tunnel-group
Tunnel Group: boston
Tunnel Tunnel
Tag Peer
------ ------
3 <null>
Tunnel
Tunnel Server
Tag Name
------ ------
3 <null>
Tunnel Tunnel Tunnel
Source Type Medium
------ ------ ------
<null> l2tp ipv4
Tunnel
Tunnel Max
Preference Sessions
---------- --------
2000 0
Tunnel Tunnel
Switch Tx
Profile Speed Method
------- --------------
<null> dynamic layer2
Tunnel Tunnel Tunnel
Source Type Medium
------ ------ ------
<null> l2tp ipv4
Tunnel
Tunnel Max
Preference Sessions
---------- --------
2000 0
Tunnel
Tunnel Tunnel Client
Password Id
-------- ------ ------
<null> <null> <null>
Tunnel
Virtual
Tunnel RWS Router
-------------- -------
system chooses <null>
Tunnel
Tunnel Tunnel Client
Password Id
-------- ------ ------
<null> <null> <null>
Tunnel
Virtual
Tunnel RWS Router
-------------- -------
system chooses <null>
Copyright © 2010, Juniper Networks, Inc.
Name
Name