Monitoring The Configuration Of The Radius Dynamic-Request Server; Table 59: Show Radius Dynamic-Request Statistics Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Software for e series broadband services routers broadband access configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

Related
Documentation

Monitoring the Configuration of the RADIUS Dynamic-Request Server

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.

Table 59: show radius dynamic-request statistics Output Fields

Field Name
Udp Port
Disconnect or CoA Requests
Disconnect or CoA Accepts
Disconnect or CoA Rejects
Disconnect or CoA No Session ID
Disconnect or CoA Bad
Authenticators
Disconnect or CoA Packets
Dropped
No Secret
Unknown Requests
Invalid Addresses Received
Setting the Baseline for RADIUS Dynamic-Request Server Statistics on page 310
show radius statistics
Display the configuration of the RADIUS dynamic-request server.
To display the configuration of the RADIUS dynamic-request server:
host1#show radius dynamic-request servers
RADIUS Request Configuration
----------------------------
Udp
IP Address
Port
Disconnect
-------------
----
----------
192.168.2.3
1700
disabled
10.10.120.104
1700
disabled
Field Description
Port on which the router listens for RADIUS server
RADIUS-initiated disconnect or CoA requests received
RADIUS-initiated disconnect or CoA requests
accepted
RADIUS-initiated disconnect or CoA requests rejected
RADIUS-initiated disconnect or CoA messages
rejected because the request did not include a session
ID attribute
RADIUS-initiated disconnect or CoA messages
rejected because the calculated authenticator in the
authenticator field of the request did not match
RADIUS-initiated disconnect or CoA packets dropped
because of queue overflow
Messages rejected because a secret was not present
in the authenticator field
Packets received with an invalid RADIUS code for
RADIUS disconnect or change of authorization
Number of invalid addresses received
Change
Of
Authorization
Secret
-------------
------
disabled
<NULL>
disabled
mysecret
Chapter 8: Monitoring RADIUS
311

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents