Monitoring Subscriber Management; Monitoring Ip Service Profiles; Table 134: Show Ip Service-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

CHAPTER 24

Monitoring Subscriber Management

Monitoring IP Service Profiles

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
This chapter describes how to monitor subscriber management on the E Series router.
The following sections describe commands you can use to display status information
and statistics for the subscriber management environment:
Monitoring IP Service Profiles on page 591
Monitoring Active IP Subscribers Created by Subscriber Management on page 592
Display information for all IP service profiles or for a specific profile.
To display information about IP service profiles:
host1#show ip service-profile
ip service-profile west500
user-name: finance22
user-prefix: xyz.bos
domain: xyzcorp.net
include virtual-router-name
include mac-address
include circuit-identifier atm prepend-circuit-type
password: 4398aa
ip service-profile atlSerPro9
user-name: salesCorp
domain: xyzcorp.net
include virtual-router-name
include circuit-identifier vlan
password: u473qv
Table 134 on page 591 lists the show ip service-profile command output field.

Table 134: show ip service-profile Output Fields

Field Name
ip service-profile
user-name
Field Description
Name of profile
Username used to retrieve information from RADIUS
for subscriber interfaces
591