[22] Framed-Route; [25] Class; [30] Called-Station-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
radius include framed-route
radius include class
radius include called-station-id
194
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include framed-compression acct-start disable
Use the no version to restore the default, enable.

[22] Framed-Route

Use the following commands to manage the Framed-Route RADIUS attribute.
radius include framed-route
Use to include the Framed-Route attribute in Acct-Start or Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include framed-route acct-start enable
Use the no version to restore the default, disable.

[25] Class

Use the following command to manage the Class RADIUS attribute.
radius include class
Use to include the Class attribute in Acct-Start or Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include class acct-start disable
Use the no version to restore the default, enable.

[30] Called-Station-Id

Use the following command to manage the Called-Station-Id RADIUS attribute.
radius include called-station-id
Copyright © 2010, Juniper Networks, Inc.