Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 677

Copyright © 2010, Juniper Networks, Inc.
Table 139: JunosE Objects Tracked by Service Manager (continued)
Name
deactivate-profile
command-in-error
command-error-status
service-interface-type
input-stat-epg
output-stat-epg
Requirement Description
Optional Specifies the interface profile used on
deactivation of the service
If not specified, is the same as the
activation-profile
Deletion of the profile is Service Manager's
responsibility
Optional Passes the value env.getErrorCommand
Service Manager displays the line in the
service definition that has the error
Optional Passes the value env.getErrorStatus
Service Manager displays the error status for
the error
Optional for Specifies the type of interface, IPv4, IPv6,
IPv4 or combination of IPv4 and IPv6, or L2TP, to
L2TP which the service session profile must be
services applied
Mandatory
for
independent
IPv6
services or
combined
IPv4 and
IPv6
services in a
dual stack
Optional Collects input statistics associated with the
external group from policy manager
Both the external parent group and the
corresponding hierarchical policy parameter
must be specified
Can be multiple pairs of external parent
groups and hierarchical policy parameters
Optional Collects output statistics associated with the
external group from policy manager
Both the external parent group and the
corresponding hierarchical policy parameter
must be specified
Can be multiple pairs of external parent
groups and hierarchical policy parameters
Chapter 27: Configuring Service Manager
639