Monitoring Dhcp Local Address Pools - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Monitoring DHCP Local Address Pools

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Display the DHCP local pool configurations.
To display information about the local address pool:
host1#show ip dhcp-local pool
*****************************************
Pool Name - ispBoston
Pool Id - 6
Domain Name - ispBoston
Network - 10.10.0.0
Mask - 255.255.255.0
NETBIOS Node Type - 1
Lease - Days:0 Hours:0 Minutes:24 Seconds:0
Grace Period - Days:0 Hours:0 Minutes:10 Seconds:0
Grace period for released leases enabled
DNS Servers
10.10.1.1
NETBIOS Name Servers
10.10.1.1
10.10.1.2
Default Routers
10.10.1.3
Server Address - 10.10.20.8
Linked Pool - cable5
High utilization threshold - 85%
Abated utilization threshold - 75%
Current utilization - 0%
Utilization trap disabled.
Shared pool allocations - 25
To display information about local address pool groups:
host1#show ip dhcp-local pool groups
DHCP Local Server Pool Groups
There is 1 group configured
*****************************************
Group Name: pool8_7-1-Group
Total Addresses Available: 145
Total Addresses In Use:
High Utilization Thresh:
Abated Utilization Thresh: 75%
Current Utilization:
Trap Enabled:
====== Pools ======
pool8_7-1
pool8_7-2
pool8_7-3
pool8_7-4
pool8_7-5
Table 113 on page 550 lists the show ip dhcp-local pool command output fields.
Chapter 22: Monitoring and Troubleshooting DHCP
0
85%
0%
no
549