Modifying Qos Configurations In A Single Service Manager Event; Table 141: Sample Modifications Using Parameter Instances; Table 142: Configuration Within A Single Service Manager Event - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Copyright © 2010, Juniper Networks, Inc.
NOTE: We recommend that you do not configure negative values for Service
Manager.

Table 141: Sample Modifications Using Parameter Instances

Action QoS Parameter Instance
Activate qos-parameter video-bw add 5000000
initial-value 0
Activate qos-parameter video-bw add 1000000
initial-value 0
Activate qos-parameter video-bw 2000000
Deactivate qos-parameter video-bw add 1000000
initial-value 0
Deactivate qos-parameter video-bw add 5000000
initial-value 0
Deactivate qos-parameter video-bw 2000000

Modifying QoS Configurations in a Single Service Manager Event

QoS accepts QoS profile attachments and parameter instances created using multiple
sources (profiles, RADIUS, or Service Manager) within a single Service Manager event.
Events include:
Subscriber login
Subscriber logout
RADIUS Change of Authority (CoA)
QoS prioritizes the creation of QoS profiles and parameter instances within events. Table
142 on page 647 lists the sources that overwrite QoS profiles and parameter instances
created by other sources. Each row represents new QoS profiles and parameter instances;
columns represent existing QoS profiles and parameter instances.

Table 142: Configuration Within a Single Service Manager Event

Profile
Profile
RADIUS
Chapter 27: Configuring Service Manager
Result
Parameter instance video-bw is created
with a value of 5000000
1000000 is added to parameter
instance video-bw, for a total of
6000000
Parameter instance video-bw is set to
2000000
1000000 is subtracted from parameter
instance video-bw for a total of
1000000
5000000 is subtracted from parameter
instance video-bw for a total of
-4000000
Parameter instance video-bw is
removed
RADIUS Service Manager
– –
–
647