Table 80: Show Aaa Domain-Map Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Action
Meaning
426
To display the mapping between user domains and virtual routers:
host1#show aaa domain-map
Domain: lac-tunnel; router-name: lac; ipv6-router-name: default
Tunnel Tunnel
Tag Tunnel Peer Source
------ ----------- ------
5 192.168.1.1 <null>
Tunnel
Tunnel Tunnel Server
Tag Client Name
------ ----------- ------
5 lac boston
Tunnel Tunnel
Tunnel Virtual Failover
Tag Router Resync
------ ------- --------
5 <null> <null>
Table 80 on page 426 lists the show aaa domain-map command output fields.

Table 80: show aaa domain-map Output Fields

Field Name
Domain
router-name
router-mask
tunnel-group
ipv6-router-name
local-interface
ipv6-local-interface
poolname
IP hint
strip-domain
override-username
Tunnel Tunnel
Type Medium
------ ------
l2tp ipv4
Tunnel
Tunnel Max
Name Preference Sessions
---------- --------
5 0
Tunnel
Tunnel Tx
Switch Speed
Profile Method
--------- ------
denver qos
Field Description
Name of the domain
Virtual router to which user domain name is mapped
IPv4 mask of the local interface
Name of the tunnel group assigned to the domain
map
IPv6 virtual router to which user domain name is
mapped
Interface information to use on the local (E Series)
side of the subscriber's interface
IPv6 interface information to use on the local (E
Series) side of the subscriber's interface
Local address pool from which the router allocates
addresses for this domain
IP hint is enabled
Strip domain is enabled
Single username used for all users from a domain in
place of the values received from the remote client
Tunnel
Password Tunnel Id
-------- -----------
welcome lac-tunnel
Tunnel RWS
--------------
4
Copyright © 2010, Juniper Networks, Inc.