Monitoring Dhcp Option 60 Information - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring DHCP Option 60 Information

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 117: show ip dhcp-local statistics output fields. (continued)
Field Name
out error
out discard
show ip dhcp-local statistics
Display configuration and action information for the DHCP vendor-option (option 60)
feature.
Use the command without additional keywords to display information for all vendor
option configurations.
Use the vendor-option-relay-server keyword and server address to display information
for option 60 strings that match a configured string that results in the packets being
sent to the specified vendor-option server.
Use the default keyword to display information for option 60 strings that do not match
a configured vendor-option string.
To display information for all vendor option configurations:
host1#show dhcp vendor-option
Codes:
* - the configured vendor-string is an exact-match
default - all DHCP client packets not matching a configured vendor-string
implied - the DHCP application is configured but has not been enabled
with the vendor-option command
drop - the DHCP application responsible for the action has not been
configured yet therefore all packets for this application
will be dropped
Total 4 entries.
Vendor-option
-------------------------------- ----------------------------------------
Juniper
default(*)
someString(*)
someString2(*)
To display information for option 60 strings that match a configured string:
host1#show dhcp vendor-option vendor-option-relay-server 10.10.1.1
Codes:
* - the configured vendor-string is an exact-match
default - all DHCP client packets not matching a configured vendor-string
implied - the DHCP application is configured but has not been enabled
with the vendor-option command
drop - the DHCP application responsible for the action has not been
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Number of packets that cannot be transmitted due to protocol
errors or configuration errors; count is independent of the
message-type counters
Number of packets that cannot be transmitted due to system
resource issues; count is independent of the message-type counters
relay to 10.10.1.1 (rx: 0)
relay to 192.168.5.5 (rx: 0, no-match: 0)
relay to 192.168.7.7 (rx: 0)
local-server (rx: 0)
Action
557