Combined And Independent Ipv4 And Ipv6 Services In A Dual Stack Overview - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide

Combined and Independent IPv4 and IPv6 Services in a Dual Stack Overview

660
profile <# name; '\n' #>
ip policy secondary-input <# name #> statistics enabled merge
ip policy output <# oname #> statistics enabled merge
qos-profile triplePlayIP
qos-parameter maxSubscBW <# outputBW; '\n' #>
<# env.setResult("mutex-group", "12" ) #>
<# env.setResult("activate-profile", name) #>
<# env.setResult("secondary-input-stat-clacl", "matchAll") #>
<# env.setResult("output-stat-clacl", "matchAll") #>
<# endtmpl #>
Activate the mutex service
2.
Use a RADIUS CoA-Request message and the new service definition to create the
mutex service. The new service is considered a mutex service because it belongs to
a mutex group.
Service Manager activates the new service and deactivates any existing active service
that is a member of the same mutex group as the new service.
(Optional) Verify the status of the new service.
3.
host1# show service-management subscriber-session client1@isp.com interface ip
192.168.0.1
User Name: CLIENT1@ISP.COM, Interface: ip 192.168.0.1
Id: 1
Owner: AAA 4194326
Non-volatile: False
State: Active
ServiceSessions:
Name
----------------------- -----
tiered(2000000,3000000)
Name
----------------------- ------------
tiered(2000000,3000000)
Internet Protocol version 6 (IPv6) is designed to enhance IP addressing and maintain
other IPv4 functions that work well. Organizations worldwide are developing new
applications to take advantage of the many feature enhancements within IPv6 to help
bring back end-to-end controlled communications across a transparent network
infrastructure. To ensure optimum performance, such applications implement a dual-stack
architecture in which IPv4 and IPv6 protocols share a common transport and framing
layer.
A dual-stack implementation supports both IPv4 and IPv6 hosts to help provide a smooth
transition to all parts of a enterprise network. With this flexible method of implementation,
providers can carry IPv6 traffic over their existing core networks and customers can roll
out IPv6 to more sites.
mutex Owner/Id State
----------- ------------------
12 AAA 4194326 ConfigApplySuccess
Non-volatile
False
Copyright © 2010, Juniper Networks, Inc.
Operation
---------
Activate