Monitoring Dhcp External Server Configuration Information; Table 109: Show Ip Dhcp-Local Binding Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Meaning
Related
Documentation

Monitoring DHCP External Server Configuration Information

Purpose
Action
Meaning
546
host1#show ip dhcp-local binding interface fastethernet 5/0.2
Address Hardware
----------- -----------------
192.168.0.6 40-00-00-0b-00-01
192.168.0.7 40-00-00-0c-00-01
192.168.1.3 11-11-22-22-33-33
Table 109 on page 546 lists the show ip dhcp-local binding command output fields.

Table 109: show ip dhcp-local binding Output Fields

Field Name
Address
Hardware
Lease
Interface
State
show ip dhcp-local binding
Display information about the router's DHCP external server application.
To display DHCP external server information:
host1#show ip dhcp-external configuration
Dhcp External : Enabled
Auto-Configure : Enabled
Server-Sync : Enabled
Disregard-Giaddr-Next-Hop : Enabled
Detect-Agent-Circuit-Id : Disabled
Recreate-Subscriber-Interface : Enabled
Duplicate-MAC-Address : Enabled
Servers:
-----------
10.1.1.1
10.2.1.1
10.3.1.1
Table 110 on page 547 lists the show ip dhcp-external configuration command output
fields.
Dhcp Local Bindings
-------------------
Lease Interface
----- ------------------
240 fastEthernet 5/0.2
240 fastEthernet 5/0.2
(600) fastEthernet 5/0.2
Field Description
IP address
MAC address of subscriber's computer
Infinite, or the number of seconds in which the IP address is available;
grace period is shown in parentheses for clients in a grace period
Interface whose statistics are reported
Binding state; expired or released state for clients currently in the
grace period
State
-------
bound
bound
expired
Copyright © 2010, Juniper Networks, Inc.