Copyright © 2010, Juniper Networks, Inc.
host1(config)#interface gigabitEthernet 2/1/4.100
host1(config-if)#vlan id 100
host1(config-if)#ipv6 unnumbered loopback 1
host1(config-if)#ipv6 nd
host1(config-if)#exit
When the PE router receives a request for DHCPv6 Prefix Delegation over the gigabit
Ethernet interface 2/1/4.100, prefixes are allocated to the client from the example local
pool. In this example, the local pool to use for allocation of prefixes is selected based on
the IPv6 address of the interface over which the request is received.
Chapter 1: Configuring Remote Access
109