Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 210

JunosE 11.3.x Broadband Access Configuration Guide
Table 37: AAA Access Message RADIUS IETF Attributes Supported
(continued)
Attribute
Number Attribute Name
[79] EAP-Message
(See Note 2.)
[80] Message-Authenticator
(See Note 2.)
[82] Tunnel-Assignment-Id
[83] Tunnel-Preference
[85] Acct-Interim-Interval
[87] NAS-Port-Id
[88] Framed-Pool
[90] Tunnel-Client-Auth-Id
(See Note 1.)
[91] Tunnel-Server-Auth-Id
(See Note 1.)
[96] Framed-Interface-Id
[97] Framed-Ipv6-Prefix
[99] Framed-Ipv6-Route
[100] Framed-IPv6-Pool
[101] Error-Cause
[123] Delegated-IPv6-Prefix
[135] Ascend-Primary-Dns
[136] Ascend-Secondary-Dns
[188] Ascend-Num-In-Multilink
[242] Ascend-Data-Filter
172
Access- Access- Access-
Request Accept Reject
– –
– –
– –
– –
– –
–
–
– –
– –
– –
– –
– – –
– –
– –
– –
– –
– –
Access- CoA- Disconnect-
Challenge Request Request
– –
– –
– – –
– – –
– – –
– –
– – –
– – –
– – –
– – –
– – –
– – –
– – –
–
– – –
– – –
– – –
– – –
– – –
Copyright © 2010, Juniper Networks, Inc.