Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 310

JunosE 11.3.x Broadband Access Configuration Guide
Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number Attribute Name
[26-147] Backup-Address-Pool
[26-150] ICR-Partition-Id
[26–151] Ipv6-Acct-Input-Octets
[26–152] Ipv6-Acct-Output-Octets
[26–153] Ipv6-Acct-Input-Packets
[26–154] Ipv6-Acct-Output-Packets
[26–155] Ipv6-Acct-Input-Gigawords
[26–156] Ipv6-Acct-Output-Gigawords
272
Description
Name of the backup local address pool that
can be used to assign addresses to users
being authenticated by a RADIUS server,
when the existing addresses in the primary
local address pool are fully exhausted.
The authentication server overrides the
backup local address pool name configured
using this attribute with the backup local
address pool name received in the
RADIUS-Access-Accept message.
Used in all the RADIUS authentication and
accounting (Acct-Start, Acct-Stop, and
Interim-Acct messages for both user and
service accounting) messages
corresponding to a subscriber to determine
the partition in which the subscriber has
logged in
Number of times that IPv6 octets have
been received from the port during the time
this service has been provided
Number of times that IPv6 octets have
been sent to the port during the time this
service has been provided
Number of times that IPv6 packets have
been received from the port during the time
this service has been provided to a framed
user
Number of times that IPv6 packets have
been sent to the port in the course of
delivering this service to a framed user
Number of times that the
IPv6-Acct-Input-Octets counter has
wrapped around 2^32 during the time this
service has been provided, and can be
present in Accounting-Request records only
where the Acct-Status-Type is set to Stop
or Interim-Update
Number of times that the
IPv6-Acct-Output-Octets counter has
wrapped around 2^32 in the course of
delivering this service, and can be present
in Accounting-Request records only where
the Acct-Status-Type is set to Stop or
Interim-Update
Subtype
Length Length Value
len sublen string:
Backup-address-pool-name
len sublen string:icr-partition-id
12 6 4–octet integer
12 6 4–octet integer
12 6 4–octet integer
12 6 4–octet integer
12 6 4–octet integer
12 6 4–octet integer
Copyright © 2010, Juniper Networks, Inc.