Applying L2Tp Tunnel Switch Profiles By Using Aaa Domain Maps; Applying L2Tp Tunnel Switch Profiles By Using Aaa Tunnel Groups - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Copyright © 2010, Juniper Networks, Inc.

Applying L2TP Tunnel Switch Profiles by Using AAA Domain Maps

To apply an L2TP tunnel switch profile to sessions associated with an AAA domain map:
Access Domain Map Tunnel Configuration mode.
1.
host1(config)#aaa domain-map westford.com
host1(config-domain-map)#router-name default
host1(config-domain-map)#tunnel 3
host1(config-domain-map-tunnel)#
For more information about how to map a domain to an L2TP tunnel from Domain
Map Tunnel Configuration mode, see "Mapping a User Domain Name to an L2TP
Tunnel Overview" on page 358 .
From Domain Map Tunnel Configuration mode, issue the switch-profile command
2.
to apply the specified L2TP switch profile to the sessions associated with this domain
map.
host1(config-domain-map-tunnel)#switch-profile concord
(Optional) Use the show aaa domain-map command to verify application of the
3.
tunnel switch profile.
host1(config-domain-map-tunnel)#run show aaa domain-map
Domain: westford.com; router-name: default; ipv6-router-name: default
Tunnel Tunnel
Tag Peer
------ ------
3 <null>
Tunnel
Tunnel Server
Tag Name Preference
------ ------ ----------
3 <null>

Applying L2TP Tunnel Switch Profiles by Using AAA Tunnel Groups

To apply an L2TP tunnel switch profile to sessions associated with an AAA tunnel group:
Access Tunnel Group Tunnel Configuration mode.
1.
host1(config)#aaa tunnel-group sunnyvale
host1(config-tunnel-group)#tunnel 3
host1(config-tunnel-group-tunnel)#
For more information about how to map a domain to an L2TP tunnel from Tunnel
Group Tunnel Configuration mode, see "Mapping a User Domain Name to an L2TP
Tunnel Overview" on page 358 .
From Tunnel Group Tunnel Configuration mode, issue the switch-profile command
2.
to apply the specified L2TP switch profile to the sessions associated with this tunnel
group.
host1(config-tunnel-group-tunnel)#switch-profile sanjose
Tunnel Tunnel Tunnel
Source Type Medium
------ ------ ------
<null> l2tp ipv4
Tunnel
Tunnel Max
Sessions Tunnel RWS
-------- -------------- -------
2000 0 system chooses <null>
Chapter 13: Configuring an L2TP LNS
Tunnel
Tunnel Tunnel Client
Password Id Name
-------- ------ ------
<null> <null> <null>
Tunnel Tunnel
Virtual Switch
Router Profile
-------
concord
395