JunosE 11.3.x Broadband Access Configuration Guide
Related
Documentation
Monitoring the RADIUS Rollover Configuration
Purpose
Action
Meaning
Related
Documentation
Monitoring RADIUS Server Information
Purpose
Action
142
Table 27: show radius override Output Fields
Field Name
Field Description
nas-ip-addr
Either the NAS-IP-Address [4] attribute is used, or it is overridden
with the Tunnel-Client-Endpoint [66] attribute.
nas-info
Either the NAS-IP-Address [4] and NAS-Identifier [32] attributes of
the virtual router generating the accounting information are used,
or they are overridden with the respective attributes of the
authentication virtual router.
show radius override
Display the configuration of the RADIUS rollover-on-reject feature.
To display the RADIUS rollover configuration:
host1#show radius rollover-on-reject
rollover-on-reject enabled
RADIUS rollover-on-reject is enabled.
show radius rollover-on-reject
Display RADIUS server information.
Use with the optional accounting, authentication, dynamic-request, route-download,
or pre-authentication keywords to limit output to the specific type of server.
To display RADIUS server configuration information:
host1#show radius servers
RADIUS Authentication Configuration
-----------------------------------
Udp
Retry
IP Address
Port
Count
-------------
----
172.28.30.117
1812
172.28.30.118
1812
172.28.30.119
1812
RADIUS Accounting Configuration
-------------------------------
Udp
Retry
IP Address
Port
Count
-------------
----
-----
172.28.30.117
1813
Maximum
Timeout
Sessions
-----
-------
--------
3
3
255
3
3
255
3
3
255
Maximum
Timeout
Sessions
-------
--------
3
3
255
Dead
Time
Secret
Status
----
------
------
30
radius
dead
30
radius
active
30
radius
alive
Dead
Time
Secret
Status
----
------
------
30
radius
dead
Copyright © 2010, Juniper Networks, Inc.