Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 755

Copyright © 2010, Juniper Networks, Inc.
Table 163: show service-management owner-session Output
Fields (continued)
Field Name
Non-volatile
Service Sessions
Operation
Service
Activate
Statistics Type
Statistics Complete
Poll Interval
Poll Expire
Activate Time
Time
Time Expire
Volume
Volume Expire
Input Bytes
Output Bytes
Chapter 28: Monitoring Service Manager
Field Description
Indicates whether the service session is stored in NVS;
RADIUS-based service sessions are not stored in NVS
Number of service sessions currently active for this
subscriber
Last operation that Service Manager performed
Name of the service, with parameter values in
parentheses
Indicates whether the last operation was activate
(True) or deactivate (False)
Type of statistics collected; none, time, or
volume-time
Whether statistics have been successfully collected;
True or False
Interval, in seconds, that interim statistics reports are
sent
Number of seconds until the next statistics report is
sent
Day, date, and time when the service session was
activated
Time threshold value set by service session profile or
RADIUS VSA
Time left until the threshold expires; this value starts
as the time threshold value and is decremented as
time passes
Volume threshold value set by service session profile
or RADIUS VSA
Volume left until the threshold is exceeded; this value
starts as the volume threshold value and is
decremented as the service statistics measure volume
Current value of input bytes that the statistics
configuration is measuring
Current value of output bytes that the statistics
configuration is measuring
717