Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 86

JunosE 11.3.x Broadband Access Configuration Guide
Example 5
host1# show configuration category aaa local-authentication users include-defaults
! Configuration script being generated on TUE NOV 09 2004 13:09:03 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 8, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE: This script represents only a subset of the full system configuration.
! The category displayed is: aaa local-authentication users
!
hostname host1
aaa new-model
aaa local username cksmith database default
password yourPassword1
operational-virtual-router boston2
no ip-address
ip-address-pool addressPoolA
!
aaa local username btjones database westfordLocal40
secret 5 }9s7-4N<WK2)2=)^!6~#
operational-virtual-router boston2
no ip-address
ip-address-pool addressPoolA
!
aaa local username maryrdavis database westfordLocal40
secret 5 E@A:nDXJJ<irb\`mF#[j
operational-virtual-router boston1
ip-address 192.168.20.106
no ip-address-pool
Example 6
host1# show configuration category aaa local-authentication virtual-router default
! Configuration script being generated on TUE NOV 09 2004 13:09:45 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 8, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE: This script represents only a subset of the full system configuration.
! The category displayed is: aaa local-authentication
!
virtual-router default
aaa local select database westfordLocal40
Example 7
48
operational-virtual-router boston1
ip-address 192.168.20.106
This example uses the users include-defaults keywords to show the configured users
and their parameters, including the default parameters no-ip-address and no
ip-address-pool.
18:31)
This example uses the virtual-router keyword with the default specification to show the
local user database that is used by the default virtual router.
18:31)
This example uses the virtual-router keyword with a named virtual router. The
include-defaults keyword shows the default configuration, including the line showing
that there is no named local user database selected.
All rights reserved.
All rights reserved.
Copyright © 2010, Juniper Networks, Inc.