Table of Contents
Advertisement
JUNOSe 11.0.x Command Reference Guide A to M
aaa tunnel tx-connect-speed-method
aaa tunnel tx-connect-speed-method { static-layer2 | dynamic-layer2
Syntax
| qos | actual }
no aaa tunnel tx-connect-speed-method
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures the method used to calculate the transmit connect speed of the subscriber's
Description
access interface for establishing a tunneled L2TP session associated with a virtual
router. This speed is reported in L2TP Transmit (TX) Speed AVP 24. The router uses
the calculation method specified with the aaa tunnel tx-connect-speed-method
command if the tunnel attributes returned from an AAA domain map, an AAA tunnel
group, or a RADIUS authentication server do not include the transmit connect speed
calculation method. The no version removes configuration of the transmit connect
speed calculation method from the tunneled L2TP sessions associated with the virtual
router.
Options
Global Configuration
Mode
74
aaa tunnel tx-connect-speed-method
static-layer2 Calculates the transmit connect speed of the subscriber's access
interface based on statically configured settings for the underlying layer 2
interface
dynamic-layer2 Calculates the transmit connect speed of the subscriber's access
interface based on dynamically configured settings for the underlying layer 2
interface
qos Calculates the transmit connect speed of the subscriber's access interface
based on settings determined by QoS
actual Calculates the transmit connect speed of the subscriber's access interface
as the lesser of the dynamic-layer2 value or the qos value
Advertisement
Table of Contents
