Table 104: Show Dhcp Binding Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Meaning
538
3070230529 7000.0000.9365
3070230531 7000.0002.9365
3070230535 7000.0006.9365
3070230537 7000.0008.9365
3070230539 7000.000a.9365
3070230541 7000.000c.9365
3070230543 7000.000e.9365
3070230545 7000.0010.9365
3070230547 7000.0012.9365
3070230549 7000.0014.9365
3070230553 7000.0018.9365
3070230555 7000.001a.9365
3070230557 7000.001c.9365
3070230569 7000.0016.9365
3070230572 7000.0004.9365
To specify nonprintable byte codes in the circuit ID string or remote ID string, you can use
the string \\xab, where ab is a hex code of the byte. This show dhcp binding command
uses the string \\xe3 to represent byte E3 in the circuit ID string. This command displays
information for the DHCP client bindings on virtual router vr3 with the specified circuit ID
string, with results arranged in ascending order by binding ID.
To display information about DHCP local server bindings with a specified subnet address:
host1:vr1#show dhcp binding local 0.0.0.0
To display information about DHCP bindings with a specified IP prefix:
host1:vr1#show dhcp binding ip—prefix 10.1.0.0/28
To display information about DHCP relay proxy bindings without a lower-layer interface:
host1:vr1#show dhcp binding relay—proxy no-interface
To display binding information for DHCP clients that match the specified remote ID string:
host1:vr1#show dhcp binding remote-id "remote id.*even"
Filtering the display of DHCP client bindings by the circuit ID string or remote ID string is
not supported for the DHCP external server application. DHCP external server does not
store information about the agent-circuit-id suboption or agent-remote-id suboption of
option 82.
Table 104 on page 538 lists the show dhcp binding command output fields.

Table 104: show dhcp binding Output Fields

Field Name
BindingId
HwAddress
Type
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
relay-p 0.0.0.0
Field Description
Client binding ID
MAC address of client
Binding type; external (DHCP external server), local (DHCP local
server), or relay-p (DHCP relay proxy)
Copyright © 2010, Juniper Networks, Inc.
71.1.0.2 bound
71.1.0.4 bound
71.1.0.8 bound
71.1.0.10 bound
71.1.0.12 bound
71.1.0.14 bound
71.1.0.16 bound
71.1.0.18 bound
71.1.0.20 bound
71.1.0.22 bound
71.1.0.26 bound
71.1.0.28 bound
71.1.0.30 bound
71.1.0.24 bound
71.1.0.6 bound