Ppp Terminate Reasons - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide

PPP Terminate Reasons

294
Table 54: Default L2TP Mappings (continued)
L2TP Terminate Reason
tunnel rx recovery stopccn avp missing mandatory assigned
tunnel id
tunnel rx recovery stopccn avp missing mandatory result
code
tunnel rx recovery stopccn avp missing random vector
tunnel rx recovery stopccn avp missing secret
tunnel rx recovery stopccn avp unknown
tunnel rx recovery stopccn no resources
tunnel rx recovery stopccn session id not null
tunnel rx recovery unexpected packet
tunnel rx recovery unknown packet message type
indecipherable
tunnel rx recovery unknown packet message type
unrecognized
tunnel rx session packet null sid invalid
tunnel rx session packet null sid without assigned session id
tunnel timeout connection
tunnel timeout connection recovery tunnel
tunnel timeout idle
tunnel unknown cause
tunnel warmstart not operational
tunnel warmstart recovery error
Table 55 on page 295 lists the default PPP terminate mappings. The table indicates the
supported PPP terminate reasons and the RADIUS Acct-Terminate-Cause attributes
they are mapped to by default.
RADIUS Acct-Terminate-Cause
Code Description
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
15 service unavailable
1 user request
9 nas error
15 service unavailable
15 service unavailable
Copyright © 2010, Juniper Networks, Inc.