Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 85

Software for e series broadband services routers broadband access configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

Example 2
Example 3
Example 4
Copyright © 2010, Juniper Networks, Inc.
host1(config)#aaa authentication ppp default local none
This example verifies that local authentication is configured on the router.
host1#show aaa authentication ppp default
local none
This example uses the show configuration category aaa local-authentication command
with the databases keyword to show the local user databases that are configured on
the router.
host1# show configuration category aaa local-authentication databases
! Configuration script being generated on TUE NOV 09 2004 12:50:18 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 8, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE:
This script represents only a subset of the full system configuration.
! The category displayed is: aaa local-authentication databases
!
hostname host1
aaa new-model
aaa local database default
aaa local database westfordLocal40
This example uses the local-authentication users keywords to show the configured
users and their parameters. The password for username cksmith is displayed unencrypted
because the default setting of disabled or no for the service password-encryption
command is used for the example. Secrets are always displayed encrypted.
host1# show configuration category aaa local-authentication users
! Configuration script being generated on THU NOV 11 2004 13:40:41 UTC
! Juniper Edge Routing Switch ERX-1400
! Version: 6.1.0 (November 10, 2004
! Copyright (c) 1999-2004 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE:
This script represents only a subset of the full system configuration.
! The category displayed is: aaa local-authentication users
!
hostname host1
aaa new-model
aaa local username cksmith database default
password yourPassword1
operational-virtual-router boston2
ip-address-pool addressPoolA
!
aaa local username btjones database westfordLocal40
secret 5 }9s7-4N<WK2)2=)^!6~#
operational-virtual-router boston2
ip-address-pool addressPoolA
!
aaa local username maryrdavis database westfordLocal40
secret 5 E@A:nDXJJ<irb\`mF#[j
Chapter 1: Configuring Remote Access
18:31)
All rights reserved.
21:15)
All rights reserved.
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents