Monitoring Aaa Server Attributes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring AAA Server Attributes

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 20: show configuration category aaa local-authentication Output
Fields (continued)
Field Name
aaa local select database
aaa local username
database
hostname
ip-address
ip-address-pool
operational virtual-router
password
secret
virtual-router
show configuration category aaa local-authentication
Display status of the attributes on the AAA server, including AAA accounting duplication
and broadcast.
For additional information about the show configuration command, see JunosE System
Basics Configuration Guide.
To display status of the attributes on the AAA server, including AAA accounting duplication
and broadcast:
host1#show configuration category aaa server-attributes include-defaults
! Configuration script being generated on FRI MAY 21 2010 07:52:13 UTC
! Juniper Edge Routing Switch ERX1440
! Version: 11.2.0 beta-1.1 [BuildId 12073] (April 22, 2010
! Copyright (c) 1999-2010 Juniper Networks, Inc.
!
! Commands displayed are limited to those available at privilege level 15
!
! NOTE: This script represents only a subset of the full system configuration.
! The category displayed is: aaa server-attributes
!
virtual-router default
Chapter 2: Monitoring and Troubleshooting Remote Access
Field Description
Local user database that the virtual router uses for
local authentication
Unique user entry in the local user database
Name of the local user database for the specified
username
Name of the host router
IP address parameter for the user entry
IP address pool parameter for the user entry
Virtual router parameter for the user entry
Password used to authenticate the subscriber
Secret used to authenticate the subscriber
Name of virtual router
All rights reserved.
11:46)
131