Forcing Immediate Deactivation Of Subscriber Service Sessions - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual
Software for e series broadband services routers broadband access configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
- Configuration manual (750 pages)
Table of Contents
Advertisement
JunosE 11.3.x Broadband Access Configuration Guide
no service-management subscriber-session service-session
no service-management subscriber-session force
676
This is the no version of the service-management owner-session command.
See service-management owner-session
Use to gracefully deactivate service sessions for a subscriber.
Use the subscriber's username and interface, not the subscriber session ID, for graceful
deactivation.
Use the no version without the service-session keyword to delete the subscriber's
session and deactivate all of the subscriber's service sessions.
Use the no version with the service-session keyword to deactivate the specified service
session.
Example
host1(config)#no service-management subscriber-session client1@isp1.com interface
atm 4/0.1 service-session "tiered(1000000, 2000000)"
This is the no version of the service-management subscriber-session command.
See service-management subscriber-session service-session
Forcing Immediate Deactivation of Subscriber Service Sessions
Use the following command to force the immediate deactivation of the specified
subscriber session—doing this deletes all active service sessions for the subscriber. We
recommend this method if you encounter difficulty when you used the graceful
deactivation method. Always use the graceful method first.
Use to force the immediate termination of a subscriber session and to deactivate all
services for the specified subscriber session.
You must specify the subscriber session ID to use the force keyword to terminate the
subscriber session.
NOTE: To determine the subscriber session ID of a session you want to
deactivate, use the show service-management subscriber-session brief
command. The display lists the IDs of all active subscriber sessions and
the owner that created the session, such as AAA (RADIUS) or CLI.
Example
host1(config)#no service-management subscriber-session 8 force
There is no affirmative version of this command; there is only a no version.
See no service-management subscriber-session force
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
