Monitoring Detailed Configuration Information About Specified Tunnels; Table 91: Show L2Tp Switch-Profile Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual
Software for e series broadband services routers broadband access configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
- Configuration manual (750 pages)
Table of Contents
Advertisement
JunosE 11.3.x Broadband Access Configuration Guide
Meaning
Related
Documentation
Monitoring Detailed Configuration Information about Specified Tunnels
Purpose
Action
442
Table 91 on page 442 lists the show l2tp switch-profile command output fields.
Table 91: show l2tp switch-profile Output Fields
Field Name
L2TP tunnel switch profile
AVP actionType action is
show l2tp switch-profile
Display detailed configuration information about specified tunnels.
To display detailed configuration information about specified tunnel by ip address:
host1#show l2tp tunnel virtual router default ip 172.31.1.98
L2TP tunnel 1/xyz is Up with 13 active sessions
L2TP tunnel 1/aol.com is Up with 13 active sessions
L2TP tunnel 1/isp.com is Up with 13 active sessions
L2TP tunnel 1/msn.com is Up with 13 active sessions
L2TP tunnel 1/mv.com is Up with 12 active sessions
5 L2TP tunnels found
To display detailed configuration information about specified tunnel:
host1#show l2tp tunnel detail 1/xyz
L2TP tunnel 1/xyz is Up with 13 active sessions
Configuration
Administrative state is enabled
SNMP traps are enabled
Tunnel address
Transport ipUdp
Virtual router default
Local address 192.168.1.230, peer address 172.31.1.98
Local UDP port 1701, peer UDP port: 1701
Tunnel status
Effective administrative state is enabled
State is established
Local tunnel id is 14529, peer tunnel id is 34
Sub-interfaces
total
Sessions
13
Statistics
packets
Control rx
14
Control tx
41
Data rx
67900944
Data tx
67900944
Control channel statistics
Receive window size = 4
Receive ZLB = 17
Receive out-of-sequence = 0
Receive out-of-window = 0
Field Description
Name of the L2TP tunnel switch profile
Indicates the tunnel switching behavior or action type
(for example, relay) configured for the specified L2TP
AVP type
active
failed
13
0
octets
discards
683
0
4666
0
67900944
0
67900944
0
errors
0
0
0
0
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
