Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 89

aaa dns primary
aaa dns secondary
aaa ipv6-dns primary
aaa ipv6-dns secondary
Copyright © 2010, Juniper Networks, Inc.
host1(config)#aaa ipv6-dns primary 2001:db8::8001
Specify the IP address of the DNS secondary name server.
2.
host1(config)#aaa dns secondary 10.10.10.6
or, for IPv6,
host1(config)#aaa ipv6-dns secondary 2001:db8::8002
NOTE: The router uses name server addresses exclusively for PPP clients
and not for domain name server resolution.
Use to specify the IP address of the DNS primary name server.
Example
host1(config)#aaa dns primary 10.10.10.5
Use the no version to set the corresponding address to 0.0.0.0.
See aaa dns
Use to specify the IP address of the DNS secondary name server.
Example
host1(config)#aaa dns secondary 10.10.10.6
Use the no version to set the corresponding address to 0.0.0.0.
See aaa dns
Use to specify the IPv6 address of the DNS primary name server.
Example
host1(config)#aaa ipv6-dns primary 2001:db8::8001
Use the no version to set the corresponding address to 0 (or ::).
See aaa ipv6-dns
Use to specify the IPv6 address of the DNS secondary name server.
Example
host1(config)#aaa ipv6-dns secondary 2001:db8::8002
Use the no version to set the corresponding address to 0 (or ::).
See aaa ipv6-dns
Chapter 1: Configuring Remote Access
51