Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 575

Software for e series broadband services routers broadband access configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
host1:vr1#show dhcp binding local
BindingId
HwAddress
----------
--------------
2409734593
8000.0001.9365
2409734595
8000.0003.9365
2409734597
8000.0005.9365
2409734599
8000.0007.9365
2409734605
8000.000d.9365
2409734607
8000.000f.9365
2409734609
8000.0011.9365
2409734611
8000.0013.9365
2409734618
8000.000b.9365
2409734619
8000.0009.9365
The output of the show dhcp binding command is identical to the output of the show
dhcp host command except for the order of the client bindings. The results of the show
dhcp binding command are arranged in ascending order by binding ID, whereas the
results of the show dhcp host command are arranged in ascending order by IP address.
To display information about a specific DHCP binding ID:
host1#show dhcp binding 3070230530
BindingId:
3070230530
HwAddress:
7000.0002.9365
IpSubnet:
0.0.0.0
IpAddress:
192.168.0.90
State:
bound
Type:
relay-p
Server:
192.168.15.1
Giaddr:
192.168.0.1
Lease:
3600
Remaining:
2079
IpInterface: GigabitEthernet1/0/1.101
ClientId:
45-41-48-00-01-70-00-00-02-93-65
Interface:
Relay Agent:
Agent Circuit Id: test circuit id
Agent Remote Id:
test remote id
Vendor Specific:
01-02-03-04-05-06-07-08-09-0a-0b-0c-0d-0e-0f-10
Unrecognized:
11-12-13-14-15-16-17-18-19-1a-1b-1c-1d-1e-1f-20
To display binding information for DHCP clients with a specified interface string:
host1:vr2#show dhcp binding interface ip71.*4
BindingId
HwAddress
----------
--------------
3053453315
7000.0002.9365
3053453325
7000.000c.9365
3053453353
7000.0016.9365
This show dhcp binding command uses the * (asterisk) regular expression metacharacter
in the interface string to display information for DHCP client bindings on virtual router
vr2 with an IP address beginning with 71 and ending with 4. The results of the show dhcp
binding command are arranged in ascending order by binding ID.
To display binding information for DHCP clients that match the specified circuit ID string:
host1:vr3#show dhcp binding circuit-id \\xe3
BindingId
HwAddress
----------
--------------
Chapter 22: Monitoring and Troubleshooting DHCP
Type
IpSubnet
IpAddress
-----
--------
---------
local
0.0.0.0
81.3.0.2
local
0.0.0.0
81.3.0.3
local
0.0.0.0
81.3.0.4
local
0.0.0.0
81.3.0.5
local
0.0.0.0
81.3.0.8
local
0.0.0.0
81.3.0.9
local
0.0.0.0
81.3.0.10
local
0.0.0.0
81.3.0.11
local
0.0.0.0
81.3.0.7
local
0.0.0.0
81.3.0.6
Type
IpSubnet
IpAddress
--------
--------
---------
external
0.0.0.0
71.1.0.4
external
0.0.0.0
71.1.0.14
external
0.0.0.0
71.1.0.24
Type
IpSubnet
IpAddress
-------
--------
---------
State
-----
bound
bound
bound
bound
bound
bound
bound
bound
bound
bound
State
-----
bound
bound
bound
State
-----
537

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents