JunosE 11.3.x Broadband Access Configuration Guide
aaa accounting duplication
aaa accounting immediate-update
aaa accounting interval
aaa accounting statistics
26
Use the no version to set the accounting protocol to the default, radius.
See aaa accounting default
Use to enable AAA duplicate accounting on a virtual router. Specifies that duplicate
accounting records be sent to the accounting server on another virtual router.
Example
host1(config)#aaa accounting duplication routerBoston
Use the no version to disable the feature.
See aaa accounting duplication
Use to send an accounting update to the accounting server immediately on receipt of
a response for an Acct-Start message.
Use the enable keyword to enable immediate updates. Use the disable keyword to
disable immediate updates. Immediate updates are disabled by default.
Example
host1(config)#aaa accounting immediate-update enable
Use the no version to restore the default condition, disabling immediate updates.
See aaa accounting immediate-update
Use to specify the default interval between updates for user and service interim
accounting.
NOTE: This command is deprecated and might be removed completely in
a future release. Use the aaa user accounting interval command to specify
the default interval for user accounting. Use the aaa service accounting
interval command to specify the default interim accounting interval used
for services created by the Service Manager application. See "Configuring
Service Manager" on page 633.
Select an interval in the range 10–1440 minutes. The default is 0, which means that
the feature is disabled.
Example
host1(config)#aaa accounting interval 60
Use the no version to turn off interim accounting for both users and services.
See aaa accounting interval
Copyright © 2010, Juniper Networks, Inc.