Monitoring Dhcp Binding Count Information - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring DHCP Binding Count Information

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 104: show dhcp binding Output Fields (continued)
Field Name
IpSubnet
IpAddress
State
Server
Giaddr
Lease
Remaining
IpInterface
ClientId
Interface
Relay Agent
Agent Circuit Id
Agent Remote Id
Vendor Specific
show dhcp binding
To compare the output of the show dhcp binding command and the show dhcp host
command, see Monitoring DHCP Binding Host Information on page 541
Display count information for DHCP client bindings and interfaces.
To display count information for all DHCP client bindings and interfaces:
host1:vr1#show dhcp count
Type IpSubnet Interfaces
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
For DHCP local server bindings, the subnet of the IP address
assigned to the client; 0.0.0.0 for DHCP external server and DHCP
relay proxy bindings
IP address assigned to client
State of the DHCP client binding
IP address of the DHCP server that allocated the client IP address
For DHCP relay proxy the IP address of the DHCP relay proxy; for
DHCP local server bindings, the IP address of the DHCP relay that
sent the packet or 0.0.0.0 if the packet comes from the client; for
DHCP external server bindings, the giaddr from the DHCP packet
Total time for which the IP address is available, in seconds
Time remaining on the current lease, in seconds
IP interface that is associated with the client
DHCP Option 61 received from the client
Subinterface for DHCP local server bindings; does not apply to
DHCP external server and DHCP relay proxy
Indicates Relay Agent Information option (option 82)
Suboption 1 of the DHCP Relay Agent information option
Suboption 2 of the DHCP relay agent information option
Suboption 9 of the DHCP relay agent information option
Assigned
Clients Clients
Bound
Clients
539