Figure 80: Configure External User Groups For Sales And Marketing; Figure 81: Configure Group Expression For Sales And Marketing; Configuring Remote Settings - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Configuring Remote Settings

Copyright © 2010, Juniper Networks, Inc.

Figure 80: Configure External User Groups for Sales and Marketing

Next, create a group expression object that references both the Sales and Marketing
2.
groups.

Figure 81: Configure Group Expression for Sales and Marketing

Finally, add the group expression object to your firewall rule in the Authentication
3.
rule option.
A remote settings object defines the DNS and WINS servers that are assigned to L2TP
RAS users after they have connected to the L2TP tunnel. You can use remote settings
objects in an L2TP VPN, and when configuring a local user on a specific device.
NOTE: For information about configuring XAuth and L2TP local users on a device, see
Network and Security Manager Configuring ScreenOS and IDP Devices Guide.
Security devices incorporate DNS (domain name server) and WINS support to permit
the use of domain names as well as IP addresses for identifying locations. A DNS or WINS
server keeps a table of the IP addresses associated with domain names. Using DNS or
WINS, you can reference locations by their domain name (www.juniper.net) in addition
to using a routeable IP address (such as 209.125.148.136).
Before you can use DNS or WINS for domain name/address resolution in a VPN, you
must create remote settings for the DNS or WINS servers (primary and secondary).
To configure a remote setting, select Remote Settings and click the Add icon. Enter a
name, color, and comment for the object, then configure the following parameters:
Chapter 8: Configuring Objects
409