[45] Acct-Authentic; [49] Acct-Terminate-Cause; [50] Acct-Multi-Session-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
radius include acct-authentic
radius include acct-terminate-cause
radius include acct-multi-session-id
204

[45] Acct-Authentic

Use the following command to manage the Acct-Authentic RADIUS attribute.
radius include acct-authentic
Use to include the Acct-Authentic attribute in Acct-On or Acct-Off messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include acct-authentic acct-on enable
Use the no version to restore the default, enable.

[49] Acct-Terminate-Cause

Use the following command to manage the Acct-Terminate-Cause RADIUS attribute.
radius include acct-terminate-cause
Use to include the Acct-Terminate-Cause attribute in Acct-Off messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include.
Example
host1(config)#radius include acct-terminate-cause acct-off disable
Use the no version to restore the default, enable.

[50] Acct-Multi-Session-Id

Use the following command to manage the Acct-Multi-Session-Id RADIUS attribute.
radius include acct-multi-session-id
Use to include the Acct-Multi-Session-Id attribute in Access-Request, Acct-Start, or
Acct-Stop messages.
You can control inclusion of the Acct-Multi-Session-Id attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include acct-multi-session-id acct-stop disable
Copyright © 2010, Juniper Networks, Inc.