Monitoring L2Tp And L2Tp Dial-Out; Monitoring The Mapping For User Domains And Virtual Routers With Aaa - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

CHAPTER 16

Monitoring L2TP and L2TP Dial-Out

Monitoring the Mapping for User Domains and Virtual Routers with AAA

Purpose
Copyright © 2010, Juniper Networks, Inc.
When you have configured L2TP and L2TP dial-out on your E Series router, you can
monitor the active tunnels and sessions.
NOTE: All of the commands in this chapter apply to both the LAC and the
LNS.
L2TP and L2TP dial-out topics are described in the following sections:
Monitoring the Mapping for User Domains and Virtual Routers with AAA on page 425
Monitoring Configured Tunnel Groups with AAA on page 428
Monitoring Configuration of Tunnel Parameters with AAA on page 430
Monitoring Global Configuration Status on E Series Routers on page 431
Monitoring Detailed Configuration Information for Specified Destinations on page 433
Monitoring Locked Out Destinations on page 435
Monitoring Configured Destination Profiles or Host Profiles on page 435
Monitoring Configured and Operational Status of all Destinations on page 438
Monitoring Statistics on the Cause of a Session Disconnection on page 438
Monitoring Detailed Configuration Information about Specified Sessions on page 439
Monitoring Configured and Operational Summary Status on page 441
Monitoring Configured Switch Profiles on Router on page 441
Monitoring Detailed Configuration Information about Specified Tunnels on page 442
Monitoring Configured and Operational Status of All Tunnels on page 445
Monitoring Chassis-wide Configuration for L2TP Dial-out on page 446
Monitoring Status of Dial-out Sessions on page 450
Monitoring Dial-out Targets within the Current VR Context on page 452
Monitoring Operational Status within the Current VR Context on page 453
Display the mapping between user domains and virtual routers.
425