Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 486

JunosE 11.3.x Broadband Access Configuration Guide
448
Table 94: show l2tp dial-out Output Fields (continued)
Field Name
Current sessions
Maximum sessions
Current sessions in the process of
connecting
Maximum sessions connecting at
one time
Current sessions pending
Maximum sessions pending
Current targets inhibited
Maximum targets inhibited
Authentication grant for
nonexistent session
Authentication deny for
nonexistent session
Dial-out Virtual router statistics
Virtual routers active
Virtual routers created
Virtual routers removed
Virtual routers in init-pending
state
Virtual routers in init-failed state
Virtual routers in down state
Virtual routers in in-service state
IP Discarded trigger frames
Field Description
Total number of session currently active on the
chassis
Highest value of current sessions recorded on the
chassis since the last router restart
Sessions currently in the connecting state
Highest number of sessions recorded on the chassis
at the same time since the last router restart
Sessions in the pending state
Highest number of sessions recorded in the pending
state since the last router restart
Targets currently in the inhibited state
Highest value of targets recorded in the inhibited state
since the last router restart
Number of authentication requests granted to
nonexistent sessions
Number of authentication requests denied to
nonexistent sessions
Statistics at the virtual router level
VRs in use by the state machine
VRs that have been used by the state machine
VRs no longer used by the state machine
VRs in the initializationPending state
VRs in the initializationFailed state
VRs in the down state
VRs in the inService state
Trigger frames that IP discarded
Copyright © 2010, Juniper Networks, Inc.